Nine GNSS Frequencies Available through New JAVAD Receiver

January 28, 2014  - By 2 Comments

JAVAD_TRE-3The 864-channel TRE-3 receiver, just announced by JAVAD GNSS, can simultaneously access all current GNSS signals, with room to spare for multiple-channel tracking of select signals, according to the company.  The new product offers many features, including:

  • Three ultra wide-band (100 MHz) fast sampling and processing, programmable digital filters and superior dynamic range. After 12-bit digital conversion, nine separate digital filters are shaped for each of the nine GPS L1/Galileo  E1, GPS L2, GPS L5/Galileo E5A, GLONASS L1, GLONASS L2, Galileo E5B/BeiDou B2/GLONASS L3, Galileo altBoc, Galilee E6/BeiDouB3/QZSS LEX, and BeiDou B1 bands.
  • Each band consists of a combination of a digital cascaded integrator-comb (CIC) filter and a digital finite impulse response (FIR) filter (up to 60-th order) where signal selection is performed.
  • Two types of digital  in-band  anti-jamming  filters  (automatic  80-th  order  and  “user selectable” 256-th order).
  • Multiple channels to acquire and track each satellite signal. For example, 20 channels can be assigned to acquire the GPS L1 signal, each spaced one millisecond apart. Up to 5 channels can be assigned to track each signal, each with different filter parameters and tracking strategies. This supports acquiring and tracking weaker signals in difficult conditions, especially under trees and canopy — potentially using up to the 864 channels available in the receiver! Several patents are pending.
  • 80 dB out-of-band interference  rejections: high dynamic range of wide RF bands and highly rectangular  digital filters make the receiver  much more resistant  to out-of-band jamming.
  • High-speed high-dynamic   automatic   gain  control  (AGC)  to  respond  to interferences and signal variations.
  • Programmable filter width (by commands).
  • Highly stable digital filters (band characteristics do not change with age, input voltages, or temperature).
  • Improved GLONASS  inter-channel  bias performance  (due to a flat digital filter shape).
  • New multipath rejection technique.
  • 60-MHZ-wide Galileo altBoc band takes advantage of the full benefit of this signal. Its multipath resistance is improved even beyond that of the company’s new multipath reduction technique, it asserts.
  • 864 GNSS channels allow tracking all current and future satellite signals.
  • Three wide-band RF sections enable monitoring spectrums and interferences in three 100-MHz-wide bands.
  • TRE-3 can track and decode the QZSS LEX signal messages, making it a unique product on the market in this regard, according to the company.
  • Features for time -transfer applications:  In time sources where the zero crossing of the input frequency defines the exact moment of the time second, the receiver monitors zero  crossings and accurately defines  the  moment  of the  time second. An external time interval measurement  unit is not required to measure zero crossing and 1-PPS offset.
  • Embedded calibrator measures phase and code delays of each of the nine bands in timing applications. External calibration is not required.

TRE-3 is form, pin-out, and command compatible with the company’s earlier TRE-G3T receiver. It uses 8-Watts of power, compared to 4-Watts of the TRE-G3T

 

 

 

 

This article is tagged with and posted in Latest News, OEM News, Survey News, Surveying
GPS World staff

About the Author:

GPS World covers all aspects of the GPS and GNSS industry for our readers. To submit news, please send your release to gpsworld @ gpsworld.com.

2 Comments on "Nine GNSS Frequencies Available through New JAVAD Receiver"

Trackback | Comments RSS Feed

  1. Joan Ramon Parcerisa says:

    Price OEM?.
    Kit evaluation..

    Regards.

  2. Diniar says:

    Is a development kit available for this receiver, if so what is the price and the date for purchase?

Post a Comment